Usage: %1!s! name= localaddr= remaddr= ttl= Parameters: Tag Value name - The name of the tunnel interface to be added. localaddr ...

Usage: %1!s! [name=] [localaddr=] [remaddr=]        [ttl=]   Parameters:         Tag           Value       name        - The name of the tunnel interface to be added.       localaddr   - The IP address for the local endpoint.       remoteaddr  - The IP address of the remote endpoint.       ttl         - The Time-To-Live (TTL) value for the packets.   Remarks: Adds an IP-in-IP tunnel to the router.   Examples:          %1!s! "IP-in-IP Tunnel" 10.0.0.1 192.168.1.1 8

Usage: %1!s! name= grpaddr= grpmask= -or- %1!s! name= scopename= Parameters: Tag Value name - The name of the interface where ... Usage: %1!s! name= igmpprototype=]igmprtrv1|igmprtrv2|igmprtrv3|igmpproxy ifenabled=]enable|disable robustvar=]integer genqueryinterval=]integer ... Usage: %1!s! name= igmpprototype=]igmprtrv1|igmprtrv2|igmprtrv3|igmpproxy ifenabled=]enable|disable robustvar=]integer genqueryinterval=]integer ... Usage: %1!s! name= interface name addr= mask= state=]enable|disable areaid= type=]nbma|p2p|broadcast prio= transdelay= retrans= ... Usage: %1!s! name= localaddr= remaddr= ttl= Parameters: Tag Value name - The name of the tunnel interface to be added. localaddr ... Usage: %1!s! name= localaddr= remaddr= ttl= Parameters: Tag Value name - The name of the tunnel interface. localaddr - The ... Usage: %1!s! name= metric=]integer updatemode=]demand|periodic announce=]none|rip1|rip1compat|rip2 accept=]none|rip1|rip1compat|rip2 ... Usage: %1!s! name= metric=]integer updatemode=]demand|periodic announce=]none|rip1|rip1compat|rip2 accept=]none|rip1|rip1compat|rip2 ... Usage: %1!s! name= mode=]enable|disable|default Parameters: Tag Value name - The name of the specific interface for which ...