Usage: %1!s! name= igmpprototype=]igmprtrv1|igmprtrv2|igmprtrv3|igmpproxy ifenabled=]enable|disable robustvar=]integer genqueryinterval=]integer ...

Usage: %1!s! [name=]        [[igmpprototype=]igmprtrv1|igmprtrv2|igmprtrv3|igmpproxy]        [[ifenabled=]enable|disable] [[robustvar=]integer]        [[genqueryinterval=]integer] [[genqueryresptime=]integer]        [[startupquerycount=]integer] [[startupqueryinterval=]integer]        [[lastmemquerycount=]integer] [[lastmemqueryinterval=]integer]        [[accnonrtralertpkts=]yes|no]   Parameters:       Tag                         Value      name                      - The name of the specific interface where                                  IGMP is being configured.      igmpprototype             - The type of protocol to be configured on the                                  interface. The default type is igmprtrv2.      ifenabled                 - Whether protocol should be enabled or                                   disabled.                                  The default is enabled.      robustvar                 - Robustness variable. Should be greater than                                  zero (0). The default value is 2.      genqueryinterval          - An interval in seconds at which general                                  queries should be sent on the interface.                                  The default value is 125 seconds.      genqueryresptime          - The maximum response time in seconds by                                  which hosts should respond to a general                                  query. The default value is 10 seconds.      startupquerycount         - The number of general queries that are to be                                  sent during startup. The default value is 2.      startupqueryinterval      - The interval between general queries sent                                  during startup. The default value is 31                                  seconds.      lastmemquerycount         - The number of group-specific queries sent                                  when notice of a host leaving the group is                                  received. The default value is 2.      lastmemqueryinterval      - The interval between group-specific queries.                                  The default value is 1000 milliseconds.      accnonrtralertpkts        - Whether to accept IGMP packets that might                                  not have the router alert option set. The                                  default is 'yes'.   Remarks: Configures IGMP on the specified interface. For IGMP Proxy, only           the 'ifenabled' parameter is used. For IGMP v1 routers,           'lastmemquerycount' and 'lastmemqueryinterval' are not used.   Example:        %1!s! "Local Area Connection" startupqueryinterval=21        The example command modifies the default startup query interval to      21 seconds for use with IGMP configuration of the specified interface.      Where other parameters are not used, related default values are assumed.