Usage: %1!s! [name=][localaddr=] [remaddr=] [ttl=] Parameters: Tag Value name - The name of the tunnel interface. localaddr - The IP address for the local endpoint. remoteaddr - The IP address of the remote endpoint. ttl - The Time-To-Live (TTL) value for the packets. Remarks: Sets the configuration for an IP-in-IP tunnel. Example: %1!s! "IP-in-IP Tunnel" 10.0.0.1 169.254.1.0 32
Usage: %1!s! name= igmpprototype=]igmprtrv1|igmprtrv2|igmprtrv3|igmpproxy ifenabled=]enable|disable robustvar=]integer genqueryinterval=]integer ...
Usage: %1!s! name= igmpprototype=]igmprtrv1|igmprtrv2|igmprtrv3|igmpproxy ifenabled=]enable|disable robustvar=]integer genqueryinterval=]integer ...
Usage: %1!s! name= interface name addr= mask= state=]enable|disable areaid= type=]nbma|p2p|broadcast prio= transdelay= retrans= ...
Usage: %1!s! name= localaddr= remaddr= ttl= Parameters: Tag Value name - The name of the tunnel interface to be added. localaddr ...
Usage: %1!s! name= localaddr= remaddr= ttl= Parameters: Tag Value name - The name of the tunnel interface. localaddr - The ...
Usage: %1!s! name= metric=]integer updatemode=]demand|periodic announce=]none|rip1|rip1compat|rip2 accept=]none|rip1|rip1compat|rip2 ...
Usage: %1!s! name= metric=]integer updatemode=]demand|periodic announce=]none|rip1|rip1compat|rip2 accept=]none|rip1|rip1compat|rip2 ...
Usage: %1!s! name= mode=]enable|disable|default Parameters: Tag Value name - The name of the specific interface for which ...
Usage: %1!s! name= mode=]Full|AddressOnly|Private| FullFirewall|AddressOnlyFirewall|FirewallOnly Parameters: Tag Value name ...