Adapter %2 : Failed to open. The most common causes of a fail to open are: (a) there is a problem with the cable, (b) the MAC address, either burned-in or locally administered, conflicts with another station on the network, (c) the adapter is set to open at the incorrect media speed,(d) the adapter is the first station to open AND the adapter is set to autosense the media speed.
Adapter %2 : An internal error has occurred. The last three DWORDs in the data section below contain an error code that should ...
Adapter %2 : An internal error has occurred. The last three DWORDs in the data section below contain an error code that should ...
Adapter %2 : An interrupt required by the adapter could not be registered. This usually means that the interrupt is already ...
Adapter %2 : Failed to open. The adapter failed to automatically detect the network data rate, most likely because this is ...
Adapter %2 : Failed to open. The most common causes of a fail to open are: (a) there is a problem with the cable, (b) the ...
Adapter %2 : Hardware diagnostics has detected a problem with the adapter: Token-Ring Protocol Handler Test Failed (Analog ...
Adapter %2 : Hardware diagnostics has detected a problem with the adapter: Token-Ring Protocol Handler Test Failed (Digital ...
Adapter %2 : PCI resources could not be allocated for the PCI adapter at the PCI Device ID specified. The last DWORD in the ...
Adapter %2 : The adapter could not open onto the ring. Please ensure that the lobe cable is properly attached, that any LAA ...