Adapter %2 : An interrupt required by the adapter could not be registered. This usually means that the interrupt is already in use by some other device. The last DWORD in the data section below contains the interrupt that could not be registered.
Adapter %2 : A slave adapter has NOT been installed for this adapter. Either the master and slave adapters are not of the ...
Adapter %2 : An I/O location required by the adapter could not be registered. This usually means that the I/O location is ...
Adapter %2 : An internal error has occurred. The last three DWORDs in the data section below contain an error code that should ...
Adapter %2 : An internal error has occurred. The last three DWORDs in the data section below contain an error code that should ...
Adapter %2 : An interrupt required by the adapter could not be registered. This usually means that the interrupt is already ...
Adapter %2 : Failed to open. The adapter failed to automatically detect the network data rate, most likely because this is ...
Adapter %2 : Failed to open. The most common causes of a fail to open are: (a) there is a problem with the cable, (b) the ...
Adapter %2 : Hardware diagnostics has detected a problem with the adapter: Token-Ring Protocol Handler Test Failed (Analog ...
Adapter %2 : Hardware diagnostics has detected a problem with the adapter: Token-Ring Protocol Handler Test Failed (Digital ...