To switch the current server at the DHCP server command context
Syntax:
set server [ServerIP | \\ServerName]
Parameters:
ServerIP - The IP address of the DHCP server.
ServerName - The NetBIOS or DNS name of the DHCP server.
Notes: When this command is used, all subsequent command
operations are performed on this server, until this
command is repeated. If no IP address or DNS name is
stated, the local computer is assumed.
Example: set server 10.1.1.1
set server \\dhcpsrv
set server \\dhcpsrv.microsoft.com
This command switches the DHCP server command context
to have subsequent commands applied towards the server
at IP address 10.1.1.1
To support client computers running 64-bit and 32-bit versions of Windows, you must install on the server either a printer ...
To support the relaying of DHCP messages from remote access clients, you must configure the properties of the DHCP Relay ...
To switch from the server context to the multicast scope sub-context identified by name. Syntax: mscope Parameters: MscopeName ...
To switch from the server context to the scope sub-context identified by its network IP address. Syntax: scope Parameters: ...
To switch the current server at the DHCP server command context Syntax: set server ServerIP | \ServerName Parameters: ServerIP ...
To sync some protected files, your device's clock must be updated. Do you want to retrieve the current time from the Internet ...
To test the setting, move your tablet pen quickly from side to side just above the screen. Move the slider and then use the ...
To track a specific conversation or thread, first select a message in the conversation of interest. Then click the Message ...
To transfer the domain naming master role to the following computer, click Change. &The current operations master is offline. ...