Usage: rule [ [ type = ] (transport | tunnel) ] [ [ srcaddr = ] (ip | dns | server) ] [ [ dstaddr = ] (ip | dns | server) ] [ [ srcmask = ] (mask | prefix) ] [ [ dstmask = ] (mask | prefix) ] [ [ protocol = ] (ANY | ICMP | TCP | UDP | RAW |) ] [ [ srcport = ] ] [ [ dstport = ] ] [ [ actioninbound = ] (permit | block | negotiate) ] [ [ actionoutbound = ] (permit | block | negotiate) ] [ [ resolvedns = ] (yes | no) ] Displays rule details from SPD. Parameters: Tag Value type -Type of rule to display, either transport or tunnel. srcaddr -Source ip address, dns name, or server type. dstaddr -Destination ip address, dns name, or server type. srcmask -Source address mask or a prefix of 1 through 32. dstmask -Destination address mask or a prefix of 1 through 32. protocol -Can be ANY, ICMP, TCP, UDP, RAW, or an integer. srcport -Source port. A value of 0 means any port. dstport -Destination port. A value of 0 means any port. actioninbound -Action for inbound packets. actionoutbound -Action for outbound packets. resolvedns -Value of 'yes' displays the resolved dns name. Remarks: 1. Default for the type parameter is ‘transport'. 2. Server type can be WINS, DNS, DHCP or GATEWAY. 3. If source or destination address name is specified, only rules associated with that address are displayed. Examples: 1. show rule - shows both transport and tunnel rules 2. show rule type=transport srcaddr=192.134.135.133 proto=TCP
Usage: rule name = | id= policy = newname = description = filterlist = filteraction = tunnel = (ip | dns) conntype = (lan ...
Usage: rule srcaddr = (ip | dns | server) dstaddr = (ip | dns | server) mmpolicy = qmpolicy = protocol = (ANY | ICMP | TCP ...
Usage: rule srcaddr = (ip | dns | server) dstaddr = (ip | dns | server) protocol = (ANY | ICMP | TCP | UDP | RAW | ) srcport ...
Usage: rule srcaddr = (ip | dns | server) dstaddr = (ip | dns | server) protocol = (ANY | ICMP | TCP | UDP | RAW | ) srcport ...
Usage: rule type = (transport | tunnel) srcaddr = (ip | dns | server) dstaddr = (ip | dns | server) srcmask = (mask | prefix) ...
Usage: setup.exe Addlocal={Server | Client | All} Installs Server or Client or Both (case sensitive). Remove={Server | Client ...
Usage: stats type = (all | ike | ipsec) Displays details of IPSec and IKE statistics. Parameters: Tag Value type -ipsec, ...
Usage: store location = (local | persistent | domain) domain = Sets the current IPSec policy storage location. Parameters: ...
Usage: The /l switch controls the creation of backup report files, which are either full (f), summary (s), or none (n). Specify ...