To display configuration information for a pull partner. Syntax: show pullpartnerconfig Server=]Name or IP address Parameters: ...

To display configuration information for a pull partner. 
 
Syntax: 
 
        show pullpartnerconfig [Server=]Name or IP address 
 
Parameters: 
 
        Server         - Name or IP address of the pull partner. 
 
Note:          If a name is provided in the server parameter and it 
               cannot be resolved to an IP address, the function 
               fails.  
 
Example:       show pullpartnerconfig server=10.2.2.2 
 
               This command displays the pull partner configuration 
               parameters for WINS server 10.2.2.2.

To display all IP address ranges available for distribution for the current multicast scope. Syntax: show iprange Notes: ... To display all IP address ranges for available for distributing address leases to scope clients for the current scope. Syntax: ... To display all pull partners or push partners (or both) for the current WINS server. Syntax: show partner Type=]0|1|2|3 Parameters: ... To display all stored and configured information for the DHCP server. Syntax: show all Notes: No additional parameters are ... To display configuration information for a pull partner. Syntax: show pullpartnerconfig Server=]Name or IP address Parameters: ... To display configuration information for a push partner. Syntax: show pushpartnerconfig Server=]Name or IP address Parameters: ... To display configuration information for the WINS server. Syntax: show info Note: If set, this command displays the following ... To display default partner configuration information. Syntax: show partnerproperties Note: This command displays the auto ... To display Management Information Base (MIB) information for the current DHCP server. Syntax: show mibinfo Notes: No additional ...