The device cannot be assigned to a virtual machine as the firmware (BIOS or UEFI) on this host computer system indicates that the device must remain in contact with the firmware running in the host. The device can only be used in the management operating system. You should contact your OEM to determine if a firmware upgrade is available, or if the PCI Express device can be reconfigured to be independent of the host firmware.
The device associated with this recorder during the last operation has been exclusively locked, causing this operation to ...
The device attempted to start a session using an unsupported authentication algorithm. The supported Authentication algorithms ...
The device attempted to start a session using an unsupported confidentiality algorithm. The supported confidentiality algorithms ...
The device attempted to start a session using an unsupported integrity algorithm. The supported integrity algorithms are ...
The device cannot be assigned to a virtual machine as the firmware (BIOS or UEFI) on this host computer system indicates ...
The Device Control Block (DCB) property contains the control settings for a serial communications device, in this case, the ...
The device could not allocate one or more required resources due to conflicts with other devices. The device DMA setting ...
The device could not allocate one or more required resources due to conflicts with other devices. The device interrupt setting ...
The device could not allocate one or more required resources due to conflicts with other devices. The device memory setting ...