/Server: The name of the WDS Server. This can be either the NetBIOS name or the FQDN. If not specified, the local server ...

[/Server:]                 The name of the WDS Server. This can                                         be either the NetBIOS name or the                                         FQDN. If not specified, the local                                         server will be used. [/Authorize:{Yes | No}]                 Sets the authorization mode of the                                         server in DHCP. [/RogueDetection:{Yes | No}]            Enables or disables DHCP rogue                                         detection. [/AnswerClients:{All | Known | None}]   Sets the PXE server policy answer                                         mode. Setting this value to 'Known'                                         means that for a device to be                                         answered it must be pre-staged. [/ResponseDelay:]      The amount of time a PXE Server must                                         wait before answering a booting                                         client. Note: This setting does not                                         apply to pre-staged devices. [/AllowN12ForNewClients:{Yes | No}]     Specifies that any unknown client                                         will receive a boot program that                                         does not require the pressing of F12                                         to initiate a network boot. Known                                         clients will receive the device                                         specified boot program or, if not                                         specified, the server default. [/ArchitectureDiscovery:{Yes | No}]     Enables or disables the network boot                                         program for architecture discovery.                                         This allows for the discovery of                                         x64 clients that do not broadcast                                         their architecture correctly. [/ResetBootProgram:{Yes | No}]          Determines whether the boot path will                                         be erased for a client which has just                                         booted without requiring an F12 key                                         press. [/DefaultX86X64ImageType:               Controls which boot images should be     {x86 | x64 | Both}]                 shown to x64 clients. [/UseDhcpPorts:{Yes | No}]              Specifies whether or not the WDS PXE                                         server should attempt to bind to the                                         DHCP port, TCP port 67. If DHCP and                                         WDS are running on the same machine,                                         this option should be set to 'No' to                                         allow for the DHCP server to utilize                                         the port, and /DhcpOption60 should                                         be set to 'Yes'. The default setting                                         for this value is 'Yes'. [/DhcpOption60:{Yes | No}]              Specifies whether DHCP Option 60                                         should be configured for PXE support.                                         If DHCP and WDS are running on                                         the same server, this option should                                         be set to 'Yes' and /UseDhcpPorts                                         should be set to 'No'. The default                                         setting for this value is 'No'. [/RpcPort:]                Specifies the TCP port number to use                                         to service client requests.