ERROR: The hardware test failed with code 1!08x!. All key protectors were removed. Possible reasons that the hardware test ...

ERROR: The hardware test failed with code 0x%1!08x!. All key protectors
were removed.

      Possible reasons that the hardware test failed are:

      1. A USB flash drive with an external key file was not found.

      - Insert a USB flash drive with an external key file into the computer.
      - If this failure persists, the computer cannot read USB drives
        during boot. You may not be able to use external keys to unlock
        the OS volume during boot.

      2. The external key file on the USB flash drive was corrupt.

      - Try a different USB flash drive to store the external key file.

      3. The TPM is off.

      - Run "manage-bde -tpm -TurnOn" to turn on the TPM.

      4. The TPM detected a change in OS boot components.

      - Remove any bootable CD or DVD from the computer.
      - If this failure persists, check that the latest firmware and BIOS
        upgrades are installed, and that the TPM is otherwise working properly.

      5. The provided PIN was incorrect.

      6. The TPM storage root key (SRK) has an incompatible authorization value.

      - To reset this value, run the TPM Initialization Wizard.

      ACTIONS REQUIRED:

      1. Resolve the hardware test failure above.
      2. Re-run the command to turn on BitLocker.