The IPX network number %1 requested by the remote side for the WAN interface is already in use on the local LAN. Possible solution: Disconnect this computer from the LAN and wait 3 minutes before dialing again;
The IPUseZeroBroadcast parameter specifies the value indicating whether IP zero broadcast is used. Setting the parameter ...
The IPUseZeroBroadcast property indicates whether IP zeros-broadcasts are used. If this parameter is set TRUE, then IP uses ...
The IPX Internal Network Number is invalid and the IPX Router Manager was unsuccessful in its attempt to automatically assign ...
The IPX network number %1 configured for the pool of WAN network numbers can not be used because it conflicts with another ...
The IPX network number %1 requested by the remote side for the WAN interface is already in use on the local LAN. Possible ...
The IPX network number %1 requested by the remote workstation for the WAN interface can not be used on the local IPX router ...
The IPX network number is invalid. It must be specified as a string with at most ten characters representing a four-byte ...
The IPX protocol cannot dial in on the modem (or other connecting device) because this computer is not configured for dialing ...
The IPX protocol cannot dial out on the modem (or other connecting device) because this computer is not configured for dialing ...