Usage: qmsas [ [ all ] ] [ [ srcaddr =] (ipv4 | ipv6 | ipv4-ipv4 | ipv6-ipv6 | dns | server) ] [ [ dstaddr =] (ipv4 | ipv6 | ipv4-ipv4 | ipv6-ipv6 | dns | server) ] [ [ protocol = ] (ANY | ICMP | TCP | UDP | RAW |) ] [ [ format = ] (list | table) ] [ [ resolvedns = ] (yes | no) ] Displays the quick mode security associations for a specified address. Parameters: Tag Value all -Displays all quick mode security associations. srcaddr -Source ip address(ipv4 or ipv6), address range, dns name, or server type. dstaddr -Destination ip address(ipv4 or ipv6), address range, dns name, or server type. protocol -Can be ANY, ICMP, TCP, UDP, RAW, or an integer. format -Output in screen or tab-delimited format. resolvedns -Value of 'yes' displays the resolved dns name. Remarks: 1. Server type can be WINS, DNS, DHCP or GATEWAY. 2. If an address range is specified, the endpoints need to be specific addresses (not lists, or subnets) and of the same type (both should be v4 or both should be v6). Examples: 1. show qmsas all 2. show qmsas srca=192.168.145.110 dsta=192.168.145.215
Usage: qmpolicy name = soft = (yes | no) pfsgroup = (GRP1 | GRP2 | GRP3 | GRPMM | NOPFS) qmsecmethods = (neg#1 neg#2 . neg#n) ...
Usage: qmpolicy name = soft = (yes | no) pfsgroup = (GRP1 | GRP2 | GRP3 | GRPMM | NOPFS) qmsecmethods = (neg#1 neg#2 . neg#n) ...
Usage: qmpolicy name = | all Deletes a quick mode policy from SPD. If 'all' is specified, all quick mode policies are deleted. ...
Usage: qmpolicy name = | all Displays quick mode policy details from SPD. Parameters: Tag Value name -Name of the quick mode ...
Usage: qmsas all srcaddr = (ipv4 | ipv6 | ipv4-ipv4 | ipv6-ipv6 | dns | server) dstaddr = (ipv4 | ipv6 | ipv4-ipv4 | ipv6-ipv6 ...
Usage: RECOVER LUN Performs operations necessary to repair the currently selected LUN. A LUN must be selected for this operation ...
Usage: REENUMERATE {SUBSYSTEMS | DRIVES} Re-enumerates objects of the specified type. SUBSYSTEMS Re-queries the available ...
Usage: REFRESH PROVIDER Refreshes internal data for the currently selected provider. A provider must be selected for this ...
Usage: REMOVE TPGROUP TPORTAL= NOERR Removes the target portal from the currently selected target portal group. TPORTAL= ...