The ISATAP interface {0} on the DirectAccess server is not available. Ensure that the interface is connected, there is global IPv6 on the server, and the interface has forwarding and advertising properties enabled. Run the command "netsh int ipv6 show int {1}" from an elevated command prompt.
The IRQ of %2 was selected for a network PCMCIA PCCARD. This IRQ is not supported for PCCARDs on this system. For network ...
The IsAlivePollInterval property provides the recommended interval in milliseconds at which the Cluster Service should poll ...
The IsAlivePollInterval property provides the recommended interval in milliseconds at which the Cluster Service should poll ...
The ISAPI extensions module is not installed. You can specify ISAPI extensions that are allowed to run, but they will not ...
The ISATAP interface {0} on the DirectAccess server is not available. Ensure that the interface is connected, there is global ...
The IsBusy property determines whether the serial port is busy. Values: TRUE or FALSE. If TRUE, the serial port is busy. ...
The IsCompatible method verifies whether the referenced physical element may be contained by or inserted into the physical ...
The iSCSI initiator mutual CHAP secret is used to authenticate the target. The secret entered here will have to be configured ...
The iSCSI initiator name is used to uniquely identify a system to iSCSI storage devices on the network. The default name ...