Usage: %1!s! name= source=]dhcp | source= static addr=]IP address mask=]IP subnet mask gateway= |none gwmetric=]integer Parameters: ...

Usage: %1!s! [name=] 
       [[source=]dhcp | 
        [source=] static [addr=]IP address [mask=]IP subnet mask]
       [[gateway=]|none [gwmetric=]integer]
 
Parameters:
 
      Tag            Value
      name         - The name of the interface.
      source       - One of the following values:
                     dhcp: Sets DHCP as the source for configuring IP
                           addresses for the specific interface.
                     static: Sets the source for configuring IP addresses
                             to local static configuration.

      gateway      - One of the following values:
                     : A specific default gateway for the 
                                   static IP address you are setting.
                     none: No default gateways are set.
      gwmetric     - The metric for the default gateway. This field should 
                     not be set if gateway is set to 'none'.
      The following options are used only if source is 'static':

      addr         - An IP address for the specified interface.
      mask         - The subnet mask for the specified IP address.
 
Remarks: Used to change the IP address configuration mode from either DHCP to
         static mode or static mode to DHCP. Adds IP addresses on an 
         interface with static IP address or adds default gateways.
 
Examples:
 
       %1!s! name="Wired Ethernet Connection" source=dhcp
       %1!s! local static 10.0.0.9 255.0.0.0 10.0.0.1 1