Usage: %1!s! name= address= / mask= type=]unicast|anycast gateway= gwmetric= validlifetime= |infinite preferredlifetime= ...

Usage: %1!s! [name=]
             [[address=][/ [[mask=]]]
                  [[type=]unicast|anycast]]
             [[gateway=] [gwmetric=]]
             [[validlifetime=]|infinite]
             [[preferredlifetime=]|infinite]
             [[subinterface=]]
             [[store=]active|persistent]

Parameters:

       Tag                 Value
       name              - Interface name or index.
       address           - IPv4 address to add, optionally followed by the
                           subnet prefix length.
       mask              - The IP subnet mask for the specified IP address.
       type              - One of the following values:
                           unicast: Adds a unicast address (default).
                           anycast: Adds an anycast address.
       gateway           - The IPv4 address of a default gateway to add.
       gwmetric          - The metric to the default gateway.
       validlifetime     - Lifetime over which the address/route is valid.
                           The default value is infinite.
       preferredlifetime - Lifetime over which the address/route is preferred.
                           The default value is infinite.
       subinterface      - LUID of subinterface on which the default gateway
                           exists.  This parameter is only needed on 
                           interfaces with multiple subinterfaces.
       store             - One of the following values:
                           active: Address will disappear on next boot.
                           persistent: Address will be persistent.
                                       This is the default.

Remarks: Adds static IP addresses and default gateways to an interface.
         If DHCP is enabled on the interface, it will be disabled.

Examples:

       %1!s! "Local Area Connection" 10.0.0.2  255.0.0.0
       %1!s! "Local Area Connection" gateway=10.0.0.3 gwmetric=2

       The first command adds a static IP address of 10.0.0.2 with a subnet
       mask of 255.0.0.0 to the Local Area Connection interface. The second
       command adds the IP address of 10.0.0.3 as a second default gateway
       for this interface with a gateway metric of 2.