Usage: %1!s! name= source=]dhcp|static address= |none register=]none|primary|both validate=]yes|no Parameters: Tag Value ...

Usage: %1!s! [name=] [source=]dhcp|static
             [[address=]|none]
             [[register=]none|primary|both]
             [[validate=]yes|no]
 
Parameters:
 
      Tag            Value
      name         - The name or index of the interface.
      source       - One of the following values:
                     dhcp: Sets DHCP as the source for configuring DNS
                           servers for the specific interface.
                     static: Sets the source for configuring DNS servers
                             to local static configuration.
      address      - One of the following values:
                     : An IP address for a DNS server.
                     none: Clears the list of DNS servers.
      register     - One of the following values:
                     none: Disables Dynamic DNS registration.
                     primary: Register under the primary DNS suffix only.
                     both: Register under both the primary DNS suffix, as
                           well as under the connection-specific suffix.
      validate     - Specifies whether validation of the DNS server setting 
                     will be performed. The value is yes by default. 
 
Remarks: Sets DNS server configuration to either DHCP or static mode. Only 
         when source is 'static', is the 'addr' option also available for 
         configuring a static list of DNS server IP addresses for the
         specified interface. If Validate switch is yes, then
         the newly set DNS server is validated. 
 
Examples:
 
       %1!s! name="Wired Ethernet Connection" source=dhcp
       %1!s! "Wired Ethernet Connection" static 10.0.0.1 primary