The PortName property identifies the ports that can be used to transmit data to the printer. If a printer is connected to more than one port, the names of each port are separated by commas. Under Windows 95, only one port can be specified. Example: LPT1:, LPT2:, LPT3:
The Port property specifies the DMA port used by the host bus adapter. This is meaningful for MCA-type buses. Example: 12 ...
The port range overlaps with the range in an existing rule for the specified cluster ip address. Specify a port range that ...
The port that the modem is attached could not be opened. This may be the result of a hardware conflict. Check the device ...
The port that the modem is using is currently open by another application. Exit any application that may currently be using ...
The PortName property identifies the ports that can be used to transmit data to the printer. If a printer is connected to ...
The position of this physical memory in an interleave. 0 indicates non-interleaved. 1 indicates the first position, 2 the ...
The POTSModem class represents a Device that translates binary data into wave modulations for sound based transmission. It ...
The PowerFailSignal property determines whether the power supply has a power failure signal. Values: TRUE or FALSE. If TRUE, ...
The pre-shared key that is being changed/removed is currently in use. Restart Routing and Remote Access for this change to ...