Usage: %1!s! operator=]matching|shorterthan|longerthan dest= mask= view=]unicast|multicast|both proto=]autostatic|local|netmgmgt|nondod|rip|static ...

Usage: %1!s!               [[operator=]matching|shorterthan|longerthan]              [[dest=] [mask=]]              [[view=]unicast|multicast|both]              [[proto=]autostatic|local|netmgmgt|nondod|rip|static]  Parameters:        Tag            Value       operator     - One of the following values:                      matching: show routes matching specified destination                      shorterthan: show routes less than the destination                      longerthan: show routes longer than the destination       dest         - The IP address of the destination       mask         - The subnet mask value for the destination IP address       view         - One of the following values:                      unicast: view only routes used for unicast                      multicast: view only routes used for multicast                      both: view both unicast and multicast routes (default)       protocol     - Show only routes added by a specific routing protocol  Remarks: Displays destinations in the routing table.  The information displayed for this command consists of: Field         Description -----         ----------- Prefix      - The address prefix, in Classless Internet Domain Routing               (CIDR) notation (ex. 10.0.0.1/8) Protocol    - The protocol which added the route Met         - The primary metric value of the route,    Gateway     - The IP address of the next hop used in   forwarding Vw          - List of views (U=unicast, M=multicast) Interface   - The interface which the route points to and uses  Examples:       %1!s!        %1!s! sh 10.0.0.1        %1!s! lo 172/8         The first command is used to view all prefixes in the routing table  .       The second command displays all prefixes shorter than 10.0.0.1 and the        third command is used to view all prefixes in the 172.0.0.0/8 subtree  .