Adapter %2 : The driver was unable to register an I/O port needed for the proper operation of this adapter. This usually occurs because another device is using the same I/O port. The last DWORD in the data section contains the I/O port that could not be registered.
Adapter %2 : The adapter has not been properly configured. If it is an EISA adapter please run the EISA configuration utility. ...
Adapter %2 : The adapter was unable to map the shared memory required to successfully initialize. This usually occurs because ...
Adapter %2 : The driver was unable to allocate a block of memory required for the proper operation of the adapter. The last ...
Adapter %2 : The driver was unable to allocate enough memory to accomodate the configured minimum receive buffers. Try reducing ...
Adapter %2 : The driver was unable to register an I/O port needed for the proper operation of this adapter. This usually ...
Adapter %2 : The driver was unable to register the interrupt handler for this adapter. This usually occurs because another ...
Adapter %2 : The internal CardBus enabler failed to configure the machine's CardBus controller (failed to map socket registers). ...
Adapter %2 : The internal CardBus enabler failed to configure the machine's CardBus controller (failed to power socket). ...
Adapter %2 : The internal CardBus enabler failed to find an adapter to enable. Check that the adapter is properly inserted. ...