Usage: filter [ filterlist = ][ srcaddr = ] (ipv4 | ipv6 | ipv4-ipv4 | ipv6-ipv6 | dns | server) [ dstaddr = ] (ipv4 | ipv6 | ipv4-ipv4 | ipv6-ipv6 | dns | server) [ [ description = ] ] [ [ protocol = ] (ANY | ICMP | TCP | UDP | RAW | ) ] [ [ mirrored = ] (yes | no) ] [ [ srcmask = ] (mask | prefix) ] [ [ dstmask = ] (mask | prefix) ] [ [ srcport = ] ] [ [ dstport = ] ] Adds a filter to the specified filter list. Parameters: Tag Value filterlist -Name of the filter list to which the filter is added. srcaddr -Source ip address (ipv4 or ipv6), address range, dns name, or server type. dstaddr -Destination ip address (ipv4 or ipv6), address range, dns name, or server type. description -Brief information about the filter. protocol -Can be ANY, ICMP, TCP, UDP, RAW, or an integer. mirrored -‘Yes' creates two filters, one in each direction. srcmask -Source address mask or a prefix of 1 through 32. Not applicable if srcaddr is set to a range dstmask -Destination address mask or a prefix of 1 through 32. Not applicable if dstaddr is set to a range srcport -Source port of the packet. A value of 0 means any port. dstport -Destination port of the packet. A value of 0 means any port. Remarks: 1. If the filter list does not exist it will be created. 2. To specify the current computer address, set srcaddr/dstaddr=me To specify all computer addresses, set srcaddr/dstaddr=any 3. Server type can be WINS, DNS, DHCP or GATEWAY. 4. If source is a server type, then dest is 'me' and vice-versa. 5. If an address range is specified, the endpoints need to be specific addresses (not lists, or subnets) and of the same type (both should be v4 or both should be v6). Examples: 1. add filter filterlist=Filter1 192.145.168.0 192.145.168.45 srcmask=24 dstmask=32 2. add filter filterlist=Filter1 srcaddr=DHCP dstaddr=0.0.0.0 protocol=ICMP srcmask=255.255.255.255 dstmask=255.255.255.255 3. add filter filterlist=Filter1 srcaddr=me dstaddr=any 4. add filter filterlist=Filter1 srcaddr= E3D7::51F4:9BC8:00A8:6420 dstaddr= ME 5. add filter filterlist=Filter1 srcaddr= 192.168.2.1-192,168.2.10 dstaddr= ME
Usage: Exporting the replication group schedule DfsrAdmin {1} {0} Schedule /{2}: - Name of the export file Type 'DfsrAdmin ...
Usage: exportpolicy file = Exports all the policies to a file. Parameters: Tag Value name -Name of the file into which the ...
Usage: EXTEND LUN {SIZE= DRIVES= , ,. | DRIVES= , ,.]} NOERR Extends the size of the currently selected LUN. SIZE= Specifies ...
Usage: filter filterlist = srcaddr = (ipv4 | ipv6 | ipv4-ipv4 | ipv6-ipv6 | dns | server) dstaddr = (ipv4 | ipv6 | ipv4-ipv4 ...
Usage: filter filterlist = srcaddr = (ipv4 | ipv6 | ipv4-ipv4 | ipv6-ipv6 | dns | server) dstaddr = (ipv4 | ipv6 | ipv4-ipv4 ...
Usage: filteraction name = description = qmpfs = (yes | no) inpass = (yes | no) soft = (yes | no) action = (permit | block ...
Usage: filteraction name = | all Deletes a filter action. Parameters: Tag Value name | all -Name of the filter action or ...
Usage: filteraction name = | guid = newname = description = qmpfs = (yes | no) inpass = (yes | no) soft = (yes | no) action ...
Usage: filteraction name = | rule = | all level = (verbose | normal) format = (list | table) wide = (yes | no) Displays the ...