To display the option values set for a specified reservation address in the scope. Syntax: show reservedoptionvalue user=UserName ...

To display the option values set for a specified reservation address 
in the scope. 
 
Syntax: 
 
        show reservedoptionvalue  [user=UserName] 
        [vendor=VendorName]  
 
Parameters: 
 
        ReservedIP     - The IP address reservation for which 
                         currently assigned options are to be 
                         displayed.  
 
        UserName       - To display the options set for the current 
                         default user class or the class specified as 
                         UserName. If this parameter is used, the 
                         user= tag must be provided.  
 
        VendorName     - To display the options set for the current 
                         default vendor class or the class specified 
                         as VendorName. If this parameter is used, the 
                         vendor= tag must be provided.  
 
Notes:         Vendor and user classes are supported only for 
               Windows 2000 Server, Windows Server 2003 and Windows 
               Server 2008. To modify the current defaults for an unspecified class 
               used with  this command, use either the Set userclass or 
               Set vendorclass commands.  
 
Example:       show reservedoptionvalue 10.2.2.100 
 
               This command displays the option values set for the 
               reserved IP address 10.2.2.100 in the current scope.