To add a replication partner for the WINS server. Syntax: add partner [Server=]IP address [[NetBIOS=]Server NetBIOS name] [[Type=]Partner type] Parameters: Server - Server IP address. NetBIOS - Server NetBIOS name. Type - 0-Pull, 1-Push, 2-Both (default). Notes: If the IP address does not resolve, the NetBIOS name parameter is used for creating the partner record. Otherwise, the NetBIOS parameter is not used. Example: add partner 10.2.2.2 This example command adds a push/pull replication partner with an IP address of 10.2.2.2 to the current WINS server.
To add a name record to the WINS server database. Syntax: add name Name=]ServerName Endchar=]16th char in Hex Scope=]scopename ...
To add a new identity, click New. To modify an identity, select it, and then click Properties. To delete an identity, select ...
To add a new scope, on the Action menu, click New Scope. For more information about setting up a DHCP server, see online ...
To add a new scope, on the Action menu, click New Scope. To authorize this DHCP server, on the Action menu, click Authorize. ...
To add a replication partner for the WINS server. Syntax: add partner Server=]IP address NetBIOS=]Server NetBIOS name Type=]Partner ...
To add a Routing and Remote Access server, on the Action menu, click Add Server. For more information about setting up a ...
To add or remove a component, click the check box. A shaded box means that only part of the component will be installed. ...
To add or remove a component, click the checkbox. A shaded box means that only part of the component will be installed. To ...
To add or set the current scope in a superscope. Syntax: set superscope Parameters: SuperscopeName - The name of the superscope ...