Bring the virtual machine into the host group ‘%HostGroupName;' or one of its children. You can do this by moving the host (on which the virtual machine is deployed) into the intended host group, or by migrating the virtual machine to a host that is already in the intended host group.
Before you can specify the IP configuration for the physical adapter, you must ensure that on the "Physical Properties" tab, ...
BGP is a protocol that enables automatic exchanges of routes between individual networks. Enable BGP only if your environment ...
Binding a virtual switch to the host partition is not supported on the particular host. Contact your SCVMM Administrator ...
Bring storage pool under management if template logical units are not managed or attach virtual hard disks which are SAN ...
Bring the virtual machine into the host group %HostGroupName;' or one of its children. You can do this by moving the host ...
By default, each SCSI adapter is not shared and has an ID of 7. If you are using this virtual machine for clustering, you ...
By default, network virtualization provides an isolated network. Select the options below to add external connectivity to ...
Cannot add new plug point to the collection. The limit for maximum number of plug points connected to the connection point ...
Cannot add VMware ESX host %VMHostName; to host group %HostGroupName; because the host group is not in a VMware VirtualCenter ...