ERROR: The hardware test failed with code 1!08x!. All key protectors{0}were removed.{0}{0}Possible reasons that the hardware ...

ERROR: The hardware test failed with code 0x%1!08x!. All key protectors{0}were removed.{0}{0}Possible reasons that the hardware test failed are:{0}{0}1. A USB flash drive with an external key file was not found.{0}{0}- Insert a USB flash drive with an external key file into the computer.{0}- If this failure persists, the computer cannot read USB drives{0}during boot. You may not be able to use external keys to unlock{0}the OS volume during boot.{0}{0}2. The external key file on the USB flash drive was corrupt.{0}{0}- Try a different USB flash drive to store the external key file.{0}{0}3. The TPM is off.{0}{0}- To manage the Trusted Platform Module (TPM), use either the{0}TPM Management MMC snap-in or the TPM Management PowerShell cmdlets.{0}{0}4. The TPM detected a change in OS boot components.{0}{0}- Remove any bootable CD or DVD from the computer.{0}- If this failure persists, check that the latest firmware and BIOS{0}upgrades are installed, and that the TPM is otherwise working properly.{0}{0}5. The provided PIN was incorrect.{0}{0}6. The TPM storage root key (SRK) has an incompatible authorization value.{0}{0}- To reset this value, run the TPM Initialization Wizard.{0}{0}ACTIONS REQUIRED:{0}{0}1. Resolve the hardware test failure above.{0}2. Re-run the command to turn on BitLocker.{0}