To set the DNS dynamic update properties for use by the current DHCP server. Syntax: set dnsconfig Update(0|1) Lookup(0|1) ...

To set the DNS dynamic update properties for use by the current DHCP 
server.  
 
Syntax: 
 
        set dnsconfig  [Update(0|1)] [Lookup(0|1)] [NonDyn(0|1)] 
 
Parameters: 
 
        Enable         - 0=Disable DNS dynamic update of DNS client 
                         information.  
                         1=Enable DNS dynamic update of DNS client 
                         information.  
 
        Update         - Forward and Reverse name lookup can be 
                         updated when a client acquires a lease.  
                         0=Update according to client request.  
                         1=Always update forward and reverse lookups. 
 
        Lookup         - Discard forward lookups for clients when 
                         lease expires.  
                         0=Disable these lookups, 1=Enable these 
                         lookups.  
 
        NonDyn         - Update DNS information for clients that do 
                         not support dynamic updates.  
                         0=Disable these updates,  
                         1=Enable these updates. 
 
Notes:         This feature is supported only for Windows 2000 Server, 
               Windows Server 2003 and Windows Server 2008. When dynamic 
               updates are enabled, the DNS server used by the DHCP 
               server to submit updates is based on DNS servers configured 
               for TCP/IP client properties for network connections.  
  
 
Example:       set dnsconfig 1 1 0 1 
 
               This command enables dynamic update of DNS information 
               by the DHCP server and configures updates to always be 
               made for both forward and reverse lookups. In addition, 
               the option to discard forward lookups when leases expire 
               is disabled and updates for non-dynamic clients are 
               enabled.

To set the default push partner parameters for the WINS server. Syntax: set pushparam State=]0|1 Strtup=]1|0 AddChange=]1|0 ... To set the delay value to use in the current scope. Syntax: set delayoffer Parameters: time-in-milliseconds -The wait interval ... To set the DNS dynamic update properties for use by the current DHCP scope or reserved IP in the current scope. Syntax: set ... To set the DNS dynamic update properties for use by the current DHCP scope or reserved IP in the current scope. Syntax: set ... To set the DNS dynamic update properties for use by the current DHCP server. Syntax: set dnsconfig Update(0|1) Lookup(0|1) ... To set the DNS dynamic update properties for use by the current DHCPv6 server. Syntax: set dnsconfig Enable=]{0|1} Update=]{0|1} ... To set the global vendor class name for subsequent operation use. Syntax: set vendorclass VendorClass Parameters: VendorClass ... To set the lease duration for multicast scope IP addresses. Syntax: set lease Parameters: Time - Lease duration for clients ... To set the lifetime value for the multicast scope. Syntax: set scopelife Parameters: Time - The time value after which the ...