To display configuration information for a push partner. Syntax: show pushpartnerconfig [Server=]Name or IP address Parameters: Server - Name or IP address of the push partner. Note: If a name is provided in the server parameter and it cannot be resolved to an IP address, the function fails. Example: show pushpartnerconfig server=10.2.2.2 This command displays the pull partner configuration parameters for WINS server 10.2.2.2.
To display all pull partners or push partners (or both) for the current WINS server. Syntax: show partner Type=]0|1|2|3 Parameters: ...
To display all stored and configured information for the DHCP server. Syntax: show all Notes: No additional parameters are ...
To display audit logging parameters for the current DHCP server. Syntax: show auditlog Notes : This command displays the ...
To display configuration information for a pull partner. Syntax: show pullpartnerconfig Server=]Name or IP address Parameters: ...
To display configuration information for a push partner. Syntax: show pushpartnerconfig Server=]Name or IP address Parameters: ...
To display configuration information for the WINS server. Syntax: show info Note: If set, this command displays the following ...
To display default partner configuration information. Syntax: show partnerproperties Note: This command displays the auto ...
To display Management Information Base (MIB) information for the current DHCP server. Syntax: show mibinfo Notes: No additional ...
To display maximum version counter value for the current WINS server. Syntax: show version Note: This command displays the ...