This command sets the global Emergency Management Services settings for the system. Emssettings does not enable or disable ...

This command sets the global Emergency Management Services settings for the
system. Emssettings does not enable or disable Emergency Management Services
for any particular boot entry.

bcdedit /emssettings [ BIOS ] | [ EMSPORT: | [EMSBAUDRATE:] ]

    BIOS        Specifies that the system will use BIOS settings for the
                Emergency Management Services configuration. This works only
                on systems that have Emergency Management Services support
                provided by the BIOS.

          Specifies the serial port to use as the Emergency Management
                Services port. This should not be specified with the BIOS
                option.

      Specifies the serial baud rate to use for Emergency Management
                Services. This command should not be specified with the BIOS
                option.  is optional, and the default is 9,600 baud.

Examples:

The following command sets the Emergency Management Services parameters to use
BIOS settings:

    bcdedit /emssettings BIOS

The following command sets the Emergency Management Services parameters to use
com2: at 115,200 baud.

    bcdedit /emssettings EMSPORT:2 EMSBAUDRATE:115200

This command sets or displays the global remote event logging settings for the system. Currently this command is an alias ... This command sets or displays the hypervisor settings for the system. This command does not enable or disable the hypervisor ... This command sets the default entry that the boot manager will use when the timeout expires. bcdedit /default Specifies the ... This command sets the display order to be used by the boot manager. bcdedit /displayorder . /addfirst | /addlast | /remove ... This command sets the global Emergency Management Services settings for the system. Emssettings does not enable or disable ... This command sets the one-time boot sequence to be used by the boot manager. bcdedit /bootsequence . /addfirst | /addlast ... This command sets the reference to the owner authorization that the TPM uses when executing an OIAP or OSAP session. Use ... This command sets the time to wait, in seconds, before the boot manager selects a default entry. For information about setting ... This command starts the process of calculating a SHA-1 digest. This command must be followed by execution of TPM_SHA1Update ...