To create and add a range of IP addresses for distribution to the scope. Syntax: add iprange ClientType MaxBootP Parameters: ...

To create and add a range of IP addresses for distribution to the 
scope.  
 
Syntax: 
 
        add iprange   [ClientType] [MaxBootP] 
 
Parameters: 
 
        StartIP        - The starting IP address of the exclusion 
                         range.  
 
        EndIP          - The ending IP address of the exclusion 
                         range. 
 
        ClientType     - Type of client: DHCP(Default), BOOTP, or 
                         BOTH.  
 
        MaxBootP       - Maximum number of BOOTP clients  
                         (ClientType = BOOTP)  
 
Notes:         The MaxBootP parameter is optional and only useful if  
               the ClientType is set to support BOOTP-type clients for 
               the scope.  
               If any optional parameter is used, all parameters(mandatory 
               as well as optional) before that must be supplied in proper 
               sequence. 
 
Example:       add iprange 10.2.2.10 10.2.2.20 
 
               This command adds the IP address range 10.2.2.10 to 
               10.2.2.20 to the distribution range in the scope.

To create and add a class to the DHCP server. Syntax: add class IsVendor(1|0) IsBinary(B|b) EnterpriseNo Parameters: ClassName ... To create and add a class to the DHCP server. Syntax: add class IsVendor(1|0) IsBinary(B|b) Parameters: ClassName - Name ... To create and add a new scope to the DHCP server. Syntax: add scope ScopeComment Parameters: ScopeAddress - The IP network ... To create and add a new scope to the DHCP server. Syntax: add scope ScopeComment Preference Parameters: ScopeAddress - The ... To create and add a range of IP addresses for distribution to the scope. Syntax: add iprange ClientType MaxBootP Parameters: ... To create and add a range of IP addresses for distribution with the current multicast scope. Syntax: add iprange Parameters: ... To create or join a homegroup, open Network and Sharing Center in Control Panel, and then click Choose homegroup and sharing ... To create the accounting configuration you have selected, click Next. To modify the accounting configuration, click Previous. ... To create, join, and access a homegroup, your computer must be connected to a home network. However, you shouldn't change ...