Indicates the initial score. The default value is 30. This parameter can be configured only if the Type parameter is specified to be ExternalRadius
Indicates the configuration in which DirectAccess should be installed. Can take one of the following values 1. FullInstall ...
Indicates the DirectAccess server or NAT public (if DirectAccess server is deployed behind a NAT) address that clients connect ...
Indicates the initial score. The default is 30 This parameter is applicable only when a RADIUS server is being configured ...
Indicates the initial score. The default value is 30. This parameter can be configured only if the EnableAccountingType parameter ...
Indicates the initial score. The default value is 30. This parameter can be configured only if the Type parameter is specified ...
Indicates the IP address range from which IP addresses are allocated to VPN clients. Consists of a start IP and an end IP. ...
Indicates the IP address range that has to be added to the pool. Consists of a start IP and an end IP. The range shouldnt ...
Indicates the IPv4/IPv6 address or hostname of the computer on which the cmdlet needs to be executed and health retrieved. ...
Indicates the limit on the amount of accounting data that can be stored, essentially the size of the store, in terms of time. ...