To display configuration information for a push partner. Syntax: show pushpartnerconfig Server=]Name or IP address Parameters: ...

To display configuration information for a push partner. 
 
Syntax: 
 
        show pushpartnerconfig [Server=]Name or IP address 
 
Parameters: 
 
        Server         - Name or IP address of the push partner. 
 
Note:          If a name is provided in the server parameter and it 
               cannot be resolved to an IP address, the function 
               fails.  
 
Example:       show pushpartnerconfig server=10.2.2.2 
 
               This command displays the pull partner configuration 
               parameters for WINS server 10.2.2.2.

To display all IP address ranges for available for distributing address leases to scope clients for the current scope. Syntax: ... To display all pull partners or push partners (or both) for the current WINS server. Syntax: show partner Type=]0|1|2|3 Parameters: ... To display all stored and configured information for the DHCP server. Syntax: show all Notes: No additional parameters are ... To display configuration information for a pull partner. Syntax: show pullpartnerconfig Server=]Name or IP address Parameters: ... To display configuration information for a push partner. Syntax: show pushpartnerconfig Server=]Name or IP address Parameters: ... To display configuration information for the WINS server. Syntax: show info Note: If set, this command displays the following ... To display default partner configuration information. Syntax: show partnerproperties Note: This command displays the auto ... To display Management Information Base (MIB) information for the current DHCP server. Syntax: show mibinfo Notes: No additional ... To display maximum version counter value for the current WINS server. Syntax: show version Note: This command displays the ...