To add a DHCP server to the list of authorized servers in the directory service. Syntax: add serverParameters: ServerDNS - The DNS domain name of the DHCP server computer. ServerIP - The IP address of the DHCP server computer. Notes: All parameters, as shown in , are required. The ServerDNS element is case-sensitive. Use SHOW SERVERS to determine the exact case of the name that is stored in the Active Directory. Example: add server dhcpsrv1.example.microsoft.com 10.2.2.2 This command adds a server with a DNS name of dhcpsrv1.example.microsoft.com and an IP address of 10.2.2.2 to the list of authorized servers in the directory service.
To activate or deactivate the current multicast scope. Syntax: set state 1|0 Notes: A value of 1 activates the current multicast ...
To activate or deactivate the current scope. Syntax: set state 0|1|2|3 Notes: A value of 1 activates the scope (default). ...
To activate this demand-dial connection, you must add a static route to the network. Specify the IP address of the remote ...
To add a demand-dial interface, you must enable demand-dial routing on this server. To enable demand-dial routing, on the ...
To add a DHCP server to the list of authorized servers in the directory service. Syntax: add server Parameters: ServerDNS ...
To add a multicast scope to the DHCP server. Syntax: add mscope MscopeComment TTL Parameters: MscopeName - The name of the ...
To add a name record to the WINS server database. Syntax: add name Name=]ServerName Endchar=]16th char in Hex Scope=]scopename ...
To add a new identity, click New. To modify an identity, select it, and then click Properties. To delete an identity, select ...
To add a new scope, on the Action menu, click New Scope. For more information about setting up a DHCP server, see online ...