Adapter %2 : Failed to open. The adapter failed to automatically detect the network data rate, most likely because this is the first adapter on the network. To avoid this error, you must specify a network data rate of either 4 Mb/sec or 16 Mb/sec.
Adapter %2 : An I/O location required by the adapter could not be registered. This usually means that the I/O location is ...
Adapter %2 : An internal error has occurred. The last three DWORDs in the data section below contain an error code that should ...
Adapter %2 : An internal error has occurred. The last three DWORDs in the data section below contain an error code that should ...
Adapter %2 : An interrupt required by the adapter could not be registered. This usually means that the interrupt is already ...
Adapter %2 : Failed to open. The adapter failed to automatically detect the network data rate, most likely because this is ...
Adapter %2 : Failed to open. The most common causes of a fail to open are: (a) there is a problem with the cable, (b) the ...
Adapter %2 : Hardware diagnostics has detected a problem with the adapter: Token-Ring Protocol Handler Test Failed (Analog ...
Adapter %2 : Hardware diagnostics has detected a problem with the adapter: Token-Ring Protocol Handler Test Failed (Digital ...
Adapter %2 : PCI resources could not be allocated for the PCI adapter at the PCI Device ID specified. The last DWORD in the ...