Your computer's startup program cannot gain access to the disk containing the partition or free space you chose. Setup cannot install Windows on this hard disk. This lack of access does not necessarily indicate an error condition. For example, disks attached to a SCSI adapter that wasn't installed by your computer manufacturer or to a secondary hard disk controller, are typically not visible to the startup program unless special software is used. Contact your computer or hard disk controller manufacturer for more information. On x86-based computers, this message may indicate a problem with the CMOS drive type settings. See your disk controller documentation for more information. Press ENTER to continue.
Your computer was not assigned an address from the network. It may require a network address for full access to the network. ...
Your computer was unable to automatically configure the IP parameters for the Network Card with the network address %1. The ...
Your computer's processor does not support hardware-based DEP. However, Windows can use DEP software to help prevent some ...
Your computer's screen resolution and color depth are currently set to a very low level. You can get a better picture by ...
Your computer's startup program cannot gain access to the disk containing the partition or free space you chose. Setup cannot ...
Your computer's system firmware does not include enough information to properly configure and use this device. To use this ...
Your contact has accepted your Remote Assistance invitation and is ready to connect to your computer. Do you want to let ...
Your credentials could not be read from the smart card. Verify the card is valid, and that it is seated properly in the reader. ...
Your credentials have failed remote network authentication. Enter a password and domain with access to the remote network. ...