%1!s! [method = ] AUTO|POOL Sets the method by which the Remote Access server assigns IPv6 prefixes to its clients. method - the method to use AUTO - automatically assigns IPv6 prefixes using DHCP. POOL - assigns IPv6 prefix from the Remote Access server's pool.
s! index range of service %2!s! is corrupted. The first DWORD in the Data section contains the first index value used and ...
s! ipv4rtrtype= lanonly | lananddd | none ipv6rtrtype= lanonly | lananddd | none rastype= IPV4 | IPV6 | BOTH | NONE Sets ...
s! is not a valid NetBIOS name. The name must be 15 or less characters and not contain any of the following characters /\[]:|<>+=;?,*%0 ...
s! method = AUTO|POOL Sets the method by which the Remote Access server assigns IP addresses to its clients. method - the ...
s! method = AUTO|POOL Sets the method by which the Remote Access server assigns IPv6 prefixes to its clients. method - the ...
s! mode = ALLOW|DENY Specifies whether dialin clients are permitted to request their own IP addresses. mode - the mode ALLOW ...
s! mode = ALLOW|DENY Specifies whether the Remote Access server will allow IP to be configured for any client connections ...
s! mode = ALLOW|DENY Specifies whether the Remote Access server will allow IPv6 to be configured for any client connections ...
s! mode = ENABLED|DISABLED Specifies whether to enable or disable broadcast name resolution using NetBIOS over TCP/IP. mode ...