Usage: %1!s! areaid= auth=]none|password stubarea=]yes|no metric= sumadv=]yes|no Parameters: Tag Value areaid - The IP address ...

Usage: %1!s! [areaid=]          [[auth=]none|password]         [[stubarea=]yes|no]         [metric=]         [[sumadv=]yes|no]   Parameters:         Tag            Value       areaid      -  The IP address of the OSPF area to set parameters.       auth        -  Specifies whether plaintext passwords are required for                      the area. If you require passwords for an area:                             All interfaces in the same area that are on the                           same network segment must use identical passwords.                             Interfaces in the same area that are on different                           networks can have different passwords.                        By default, passwords are enabled and the password is                      12345678. Passwords are transmitted in plaintext,                      so this option is for identification, not security.       stubarea    -  Specifies whether this area is configured as a stub                      area. A stub area is an OSPF area that does not                      enumerate external routes. External routes from                      outside the OSPF Autonomous System (AS) are not                      flooded into or through stub areas. Routing to AS                      external destinations in these areas is based only                      on a summary default route. This reduces the overhead                      for a stub area's internal routers.                        You cannot configure the backbone as a stub area. You                      cannot configure virtual links through stub areas.       metric      -  The cost of the summary default route that the router                      advertises into the stub area. If the area is configured                      as a stub area, and the router itself is an area border                      router, then the stub metric indicates the cost of the                      summary default route that the router advertises into                      the area.       sumadv      -  Import summary advertisements   Remarks: Changes OSPF parameters for the specified area.   Examples:          %1!s! 10.0.0.1 auth=none stubarea=yes sumadv=yes