System Center Virtual Machine Manager 2012 R2
- For Setup to continue, the following hardware and software prerequisites need to be met. Install the missing items, and then ...
- For the -AddCloudResource or -RemoveCloudResource parameters, only the following types of objects can be used: LoadBalancer, ...
- For the -AddScope or -RemoveScope parameters, only the following types of objects can be used: Template, HostGroup, or LibraryShare. ...
- For the highly available virtual machine, the selected logical network (%LogicalNetworkName;) is not available as a highly ...
- For the port profile for virtual network adapters (%VirtualNetworkAdapterNativePortProfileName;), nonzero values were specified ...
- For the port profile for virtual network adapters (%VirtualNetworkAdapterNativePortProfileName;), the value specified for ...
- For the virtual DVD drive, either set it to use no media, or connect it to an .iso file. Then try the operation again. If ...
- For the Windows Server 2008 operating system, you must have a product key property on the operating system virtual hard disk. ...
- For virtual network adapters you must specify a VM network and a logical switch to be used. This can be done through the ...
- For VLAN ranges, you can specify comma separated values. Each value can be arange or single ID. For example: 1-5, 6, 8-10. ...
- Found a planned VM in host %VMHostName; by the specified Hyper-V VMId. This could be due to a currently running migration ...
- Found unexpected value %Name; in the configuration for %Value;. %Name; is not expected as it is not a declared parameter ...
- Four partitions can be created on each MBR disk. If one partition has been marked as the boot partition, only three can be ...
- Free %BinaryDiskSpaceRequired; MB of disk space on the volume %SystemVolumeDriveLetter; on server %VMHostName; to transfer ...
- Free %BinaryDiskSpaceRequired; of disk space on the volume %VolumeDriveLetter;, or choose a different volume to continue ...
- Full discovery will start after completing this wizard. If you cancel out of this wizard, go to the Fabric workspace, find ...
- Gateways have a front end that is connected to a traditional physical network and a back end that contains the network using ...
- Generation 1 virtual machines have capabilities that were previously supported by Windows Server 2012 and other host operating ...
- Get the root private cloud for this sub-cloud, and then attach or detach the capability profiles from that private cloud. ...
- Give a name to the IP subnet to be virtualized by the VM Network. Enter IP subnets using CIDR notation, for example: 192.168.1.0/24. ...
- Given connection point is associated with node that was not passed to layout data during construction and it cannot be operated ...
- Group synchronization for replication group %Name; with operation %Operation; couldn't be modified. Error: %StorageErrorCode; ...
- Guest agent is in an invalid state to accept %Name; request. The current service operation has to be canceled first or in ...
- Guest agent is in an invalid state to accept Abandon request. The current service operation has to be canceled first or in ...
- Hardware changes while cloning a Hyper-V virtual machine, VMware virtual machine, or stored virtual machine are not supported ...
- Have the owner of the VM network delete or update it, or place the underlying network sites (logical network definitions) ...
- High availability setting changes to the service tier template %Name; during servicing are not supported and will be ignored. ...
- Highlighted volumes do not have enough disk space available for selected features. You can either remove some files from ...
- Host %VMHostName; can't be removed as possible owner from the Virtual Machine %VMName; since the Virtual Machine is running ...
- Host %VMHostName; is not available for placement because it is in a state that has limited management functionality. To use ...
- Host cannot be configured for OS deployment with virtual network adapters whose VM Network has isolation type Windows Network ...
- Host cluster %HostClusterName; was not fully refreshed because not all of the nodes could be contacted. Highly available ...
- Host group %HostGroupName; and its parent host groups are not connected to a load balancer that matches the requirements ...
- Host group specified on VM configuration %Name; is not the same as the host group specified on parent service configuration. ...
- Host groups cannot be associated with storage logical unit %LogicalUnit; because it belongs to a storage pool on a Windows-based ...
- Host network adapter (%HostNetworkAdapterName;) cannot be removed from the virtual switch because it shares a MAC address ...
- Host reserves are the resources set aside for the host operating system. Placement will return an error for a host if resource ...
- Hosts selected cannot be clustered because installation of cluster feature on %VMHostName; failed with error %DetailedErrorMessage;. ...
- Hosts that are running Microsoft Virtual Server have been found in the VMM database. Virtual Server hosts are not supported ...
- Hosts that are running Microsoft Windows Server 2008 R2 have been found in the VMM database. These hosts are not supported ...
- Hosts will be considered for optimization when their available resources fall below the following thresholds. Placement will ...
- Hosts will be considered for power optimization if they can be evacuated without causing any remaining nodes of the cluster ...
- Hyper-V Recovery Manager setting changes to the service tier template %Name; during servicing are not supported and will ...
- Hyper-V replication is enabled for virtual machine '%VMName;'. It will be disabled if you enable Microsoft Azure Site Recovery ...
- If %ComputerName; does not restart in 15 minutes, manually restart it back into the original operating system using the boot ...
- If -OverrideNetworkLocation is set to TRUE, specify -NetworkLocation. If -OverrideNetworkLocation is set to FALSE, omit -NetworkLocation. ...
- If a more recent conversion job of the source machine %ServerName; exists, restart that job instead. Otherwise, restart the ...
- If a value for -Fixed or -Dynamic parameter is specified, a value for the -VolumeDeviceID parameter must also be specified. ...
- If a value for the -DiskSizeAdd parameter is specified, a value for the -VolumeDeviceID parameter must also be specified. ...
- If an untrusted security certificate is associated with the network service, VMM must import it into the local machine certificate ...
- If any of the selected hosts are currently managed by another Virtual Machine Manager (VMM) environment, select this option ...
- If corrective actions are being applied out of band, then restart the job with the SkipLastFailedStep option to skip the ...
- If DHCP is not available, you must specify one or more IP addresses for the file server cluster. Use commas or new lines ...
- If Hyper-V network virtualization needs to be disabled, remove the dependent workload on the logical switch instance on the ...
- If network adapter %FriendlyName; is bound to this virtual switch, there will be no physical network adapters dedicated to ...
- If repairing the virtual machine failed to resolve the state of the virtual machine, use the PowerShell cmdlet Repair-VM ...
- If server %VMHostName; contains an HBA that supports NPIV, ensure that the right version of firmware and driver are installed, ...
- If Server Manager is running, close Server Manager and restart Setup, or manually add the failover clustering server feature ...
- If Server Manager is running, close Server Manager and restart Setup, or manually add the Windows Standards-Based Storage ...
- If Server Manager is running, close Server Manager and restart Setup, or manually add the Windows Update Services API feature ...
- If the configuration is being run from OEM Setup, verify that Setup has the necessary privileges to configure firewall exceptions, ...
- If the configuration of the source machine has recently changed, gather system information again by restarting the Convert ...
- If the error repeats and the server is responding, adjust GatewayPolicyUpdateTimeout registry value and try the operation ...
- If the guest agent installation also fails, manually remove the guest agent from the virtual machine, and then try the repair ...
- If the guest operating system on the virtual machine cannot access the .iso file, re-attach the file. To do this, in the ...
- If the host is in a non-trusted domain, remove the host (%ComputerName;) from VMM in the VMs and Hosts workspace of the VMM ...
- If the host is intended to be used as a Hyper-V host, but you are not sure whether the host has hardware-assisted virtualization ...
- If the host is intended to be used as a Hyper-V host, download and install the released version of Hyper-V (KB950050) from ...
- If the Hyper-V role is not enabled for selected Windows Server hosts, Virtual Machine Manager will attempt to enable it automatically. ...
- If the Hyper-V role is not enabled on any of the selected servers, Virtual Machine Manager will enable the role on those ...
- If the script application deployment command's job restart action is set to restart, then the script will be re-executed. ...
- If the script command's job restart action is set to restart, then the script will be re-executed. Otherwise, the script ...
- If the script command's job restart action is set to restart, then the script will be re-executed. Otherwise, the script ...
- If the size of the volume %VolumeDriveLetter; exceeds the maximum IDE bus disk size for Virtual Server, try using a Hyper-V ...
- If the source machine has encrypted volumes, an offline P2V conversion might render the system unbootable. We highly recommend ...