UI Translation

Windows 8.1

  1. The session will be disconnected due to a data encryption error. Try to connect again. If the problem persists, contact your ...
  2. The session will be disconnected due to a protocol error. Try to connect again. If the problem persists, contact your system ...
  3. The session {0} cannot be disconnected because the specified idle time-out value {1} (seconds) is either greater than the ...
  4. The SessionId property indicates the id of the session used by the user connected to the computer system. The user may be ...
  5. The SessionId property specifies the unique identifier that is generated by the operating system when the session is created. ...
  6. The set of components enabled and the maximum number of prefetch files for scenarios recorded by the Operation Recorder API. ...
  7. The set of domain controllers that are specified as preferred bridgehead servers in this site does not include all the directory ...
  8. The set of network protocols available to DCOM on this machine. The ordering of the protocols reflects the priority in which ...
  9. The set of protocols and endpoints available for use by clients of this DCOM server. The system defaults entry indicates ...
  10. The SetArpAlwaysSourceRoute method is used to set the transmission of ARP queries by the TCP/IP. The method returns an integer ...
  11. The SetArpUseEtherSNAP method is used to enable ethernet packets to use 802.3 SNAP encoding. By default, the stack transmits ...
  12. The SetBinaryValue method sets the data value for a named value whose data type is REG_BINARY. The SetBinaryValue method ...
  13. The SetDatabasePath method sets the path to the standard Internet database files (HOSTS, LMHOSTS, NETWORKS, PROTOCOLS). It ...
  14. The SetDateTime method sets the current system time on the computer. On computer systems running Windows NT/2000, the calling ...
  15. The SetDeadGWDetect method is used to enable Dead Gateway detection. Setting this parameter to TRUE causes TCP to perform ...
  16. The SetDefaultTOS method is used to set the default Type of Service (TOS) value in the header of outgoing IP packets. The ...
  17. The SetDefaultTTL method is used to set the default Time to Live (TTL) value in the header of outgoing IP packets. The TTL ...
  18. The SetDNSDomain method allows for the setting of the DNS domain. This is an instance dependent method call that applies ...
  19. The SetDNSServerSearchOrder method allows for the setting of the server search order as a array of elements. This is an instance ...
  20. The SetDNSSuffixSearchOrder method allows for the setting of the suffix search order as a array of elements. This is an instance ...
  21. The SetDynamicDNSRegistration method is used to indicate dynamic DNS registration of IP addresses for this IP bound adapter. ...
  22. The SetExpandedStringValue method sets the data value for a named value whose data type is REG_EXPAND_SZ. The SetExpandedStringValue ...
  23. The SetForwardBufferMemory method is used to specify how much memory IP allocates to store packet data in the router packet ...
  24. The SetGateways method is used to specify a list of gateways for routing packets destined for a different subnet than the ...
  25. The SetIGMPLevel method is used to set the extent to which the system supports IP multicasting and participates in the Internet ...
  26. The SetIPConnectionMetric method is used to set the routing metric associated with this IP bound adapter. The method returns ...
  27. The SetIPUseZeroBroadcast method is used to set IP zero broadcast usage. If this parameter is set to TRUE, then IP will use ...
  28. The SetIPXFrameTypeNetworkPairs method is used to set Internetworking Packet Exchange (IPX) network number/frame pairs for ...
  29. The SetIPXVirtualNetworkNumber method is used to set the Internetworking Packet Exchange (IPX) virtual network number on ...
  30. The SetKeepAliveInterval method is used to set the interval separating Keep Alive Retransmissions until a response is received. ...
  31. The SetKeepAliveTime method is used to set how often TCP attempts to verify that an idle connection is still available by ...
  32. The SetMTU method is used to set the default Maximum Transmission Unit (MTU) for a network interface. The SetMTU method has ...
  33. The SetMultiStringValue method sets the data value for a named value whose data type is REG_MULTI_SZ. The SetMultiStringValue ...
  34. The SetNumForwardPackets method is used to set the number of IP packet headers allocated for the router packet queue. When ...
  35. The SetPMTUBHDetect method is used to enable detection of Black Hole routers. Setting this parameter to TRUE causes TCP to ...
  36. The SetPMTUDiscovery method is used to enable Maximum Transmission Unit (MTU) discovery. Setting this parameter to TRUE causes ...
  37. The SetPriority method attempts to change the execution priority of the process. In order to set the priority to Realtime, ...
  38. The SetSecurityDescriptor method updates the specified key's security descriptor with the supplied _SecurityDescriptor. The ...
  39. The SetStatus operation cannot be completed, because another SetStatus operation is already in progress. Try again after ...
  40. The SettableBaudRate property indicates whether the baud rate can be changed for this serial port. Values: TRUE or FALSE. ...
  41. The SettableDataBits property indicates whether data bits can be set for this serial port. Values: TRUE or FALSE. A value ...
  42. The SettableFlowControl property indicates whether flow control can be set for this serial port. Values: TRUE or FALSE. A ...
  43. The SettableParity property indicates whether parity can be set for this serial port. Values: TRUE or FALSE. A value of TRUE ...
  44. The SettableParityCheck property indicates whether parity checking can be set for this serial port (if parity checking is ...
  45. The SettableRLSD property indicates whether RLSD can be set for this serial port (if Received Line Signal Detect (RLSD) is ...
  46. The SettableStopBits property indicates whether stop bits can be set for this serial port. Values: TRUE or FALSE. A value ...
  47. The SetTcpipNetbios method is used to set the default operation of NetBIOS over TCP/IP for this network adapter. Windows ...
  48. The SetTcpMaxConnectRetransmissions method is used to set the number of attempts TCP will retransmit a Connect Request before ...
  49. The SetTcpMaxDataRetransmissions method is used to set the number of times TCP will retransmit an individual data segment ...
  50. The SetTcpNumConnections method is used to set the maximum number of connections that TCP may have open simultaneously.The ...
  51. The SetTcpUseRFC1122UrgentPointer method is used to specify whether TCP uses the RFC 1122 specification for urgent data, ...
  52. The SetTcpWindowSize method is used to set the maximum TCP Receive Window size offered by the system. The Receive Window ...
  53. The setter method should be public, void, static, and have two parameters. The first parameter should be of the type PSObject. ...
  54. The setting cannot be configured because the type specified by the Type parameter is Binary and a string is specified in ...
  55. The setting cannot be configured because the type specified by the Type parameter is DWord and a string is specified in the ...
  56. The setting cannot be configured because the type specified by the Type parameter is QWord and a string is specified in the ...
  57. The setting change being made requires the drive to first be removed before it can be added back with the requested modifications. ...
  58. The setting change being made requires the drive to first be removed before it can be added back with the requested modifications. ...
  59. The setting change being made requires the drive to first be removed before it can be added back with the requested modifications. ...
  60. The setting change being made requires the drive to first be removed before it can be added back with the requested modifications. ...
  61. The Setting class represents configuration-related and operational parameters for one or more ManagedSystemElement(s). A ...
  62. The Setting class represents configuration-related and operational parameters for one or more ManagedSystemElements. An Element ...
  63. The setting for HangRecoveryAction on this cluster is not the default and recommended setting. This setting controls the ...
  64. The setting for the new computer organizational unit (OU) can only be specified if Windows Deployment Services is configured ...
  65. The Setting reference in the Win32_WMIElementSetting association, represents the WMI settings available to the Win32 service. ...
  66. The Setting reference represents a CIM_VideoControllerResolution containing settings that can be applied to the video controller. ...
  67. The Setting reference represents the role of a user that can access a component grouped under the associated Win32_DCOMApplication ...
  68. The Setting reference represents the role of a user that can launch a component grouped under the associated Win32_DCOMApplication ...
  69. The Setting reference represents the Win32_SerialPortConfiguration containing a configuration setting for the serial port. ...
  70. The setting you entered, %1, is not valid for this device. The next valid setting of %2 has been chosen automatically. Would ...
  71. The setting you requested cannot be supported. Open Display in Control Panel, adjust the settings, and then try to change ...
  72. The settings downloaded from the server indicate that Windows Mail does not work with %ls. However, %ls does support sending ...
  73. The settings downloaded from the server indicate that Windows Mail does not work with %ls. However, you can find more information ...
  74. The settings for '%2' (%1) cannot be modified because the network adapter has been configured with version %3, but version ...
  75. The settings for '%2' (%1) cannot be modified because the virtual switch has been configured with version %3, but version ...
Deutsch (Deutschland)
German (Germany) Español (España)
Spanish (Spain) Français (France)
French (France) italiano
Italian 日本語
Japanese 한국어
Korean Português
Portuguese Русский
Russian English
English (United States)