UI Translation

Windows 8.1

  1. The Invoke-IpamGpoProvisioning cmdlet creates and links three Group Policy Objects in the domain indicated by Domain parameter, ...
  2. The Invoke-IpamGpoProvisioning cmdlet creates and links three Group Policy Objects in the domain indicated by Domain parameter, ...
  3. The IO operation at logical block address %2 for Disk %3 took %4 milliseconds. This was longer than the maximum expected ...
  4. The IOPMVideoOutput::Configure function returns this error code if the passed in sequence number is not the expected sequence ...
  5. The IOPMVideoOutput::Configure method cannot enable HDCP because the display adapter's HDCP hardware is already being used ...
  6. The IOPMVideoOutput::Configure method cannot enable the specified output protection technology because the output's screen ...
  7. The IOPMVideoOutput::COPPCompatibleGetInformation or IOPMVideoOutput::Configure method failed because the display driver ...
  8. The IOPMVideoOutput::GetInformation and IOPMVideoOutput::COPPCompatibleGetInformation methods return this error if the passed ...
  9. The IOPMVideoOutput::GetInformation method cannot return the version of the SRM being used because the application never ...
  10. The IP address %1 you have entered for this network adapter is already assigned to another adapter '%2' on this computer. ...
  11. The IP address %1 you have entered for this network adapter is already assigned to another adapter (%2) which is no longer ...
  12. The IP address and host name of the server belong to different sites, which can lead to improper referral ordering. Host ...
  13. The IP address lease %1 for the Network Card with network address %3 has been denied by the DHCP server %4 (The DHCP Server ...
  14. The IP address of the entire subnet, formatted according to the appropriate convention as defined in the AddressType property ...
  15. The IP address range entered is invalid for the following reason: %1!s! The following constraints apply to IP address ranges: ...
  16. The IP address that this ProtocolEndpoint represents, formatted according to the appropriate convention as defined in the ...
  17. The IP address to which remote client computers connect is not defined on a network adapter that has IPv6 enabled and does ...
  18. The IP addresses listed below are excluded from the range of private IP addresses because they are already assigned to computers ...
  19. The IP Helper service (iphlpsvc) has stopped, and DirectAccess might not work as expected. The IP Helper service provides ...
  20. The IP Helper service (iphlpsvc) has stopped, and DirectAccess might not work as expected. The IP Helper service provides ...
  21. The IP Helper service (iphlpsvc) has stopped. DirectAccess might not function as expected. The IP Helper service provides ...
  22. The IP performance object consists of counters that measure the rates at which IP datagrams are sent and received by using ...
  23. The IP Range %1 is invalid and it will be ignored. Ranges are specified using the syntax IP1-IP2. Multiple ranges are separated ...
  24. The IP4PersistedRouteTable class contains IP routes that are persisted. By default, the routes you add to the routing table ...
  25. The IP4RouteTable class information governs where network data packets are routed to (e.g. usually internet packets are sent ...
  26. The IPAddress property contains a list of all of the IP addresses associated with the current network adapter. Example: 155.34.22.0 ...
  27. The IPAM audit task completed collection of audit information. The next run of the IPAM audit task has been scheduled for ...
  28. The IPAM audit task failed to locate the bookmarked %1 event on %2 %3. Some of the events since the last event collection ...
  29. The IPAM client has requested data set whose size exceeds the maximum supported limit. The IPAM client might get disconnected. ...
  30. The IPAM database schema conversion completed at %2 on %1. The database schema was converted from version %3 to version %4. ...
  31. The IPAM database schema conversion from version %3 to version %4 failed with error: %5. Your IPAM installation might not ...
  32. The IPAM operation '%1' has completed successfully in %2 milliseconds, which is beyond the configured timeout value of %3 ...
  33. The IPAM operation '%1' took %2 milliseconds, which is beyond the configured timeout value of %3 milliseconds. But, failed ...
  34. The IPAM server must be provisioned before you can use it. To provision the IPAM server please launch IPAM server provisioning ...
  35. The IPConnectionMetric indicates the cost of using the configured routes for this IP bound adapter and is the weighted value ...
  36. The IPConnectionMetric parameter assigns an value ranging from 1 to 9999, and indicates the cost of using the configured ...
  37. The IPFilterSecurityEnabled parameter specifies whether IP security is enabled globally across all IP-bound network adapters. ...
  38. The IPFilterSecurityEnabled property indicates whether IP port security is enabled globally across all IP-bound network adapters. ...
  39. The IPMI device driver attempted to communicate with the IPMI BMC device during device creation. However the communication ...
  40. The IPMI device driver attempted to communicate with the IPMI BMC device during normal operation. However the communication ...
  41. The IPMI device driver attempted to determine if the system supported an IPMI BMC device. The driver attempted to detect ...
  42. The IPMI device driver read an administrator supplied parameter that is invalid. The device driver will use a system defined ...
  43. The IPMI Provider attempted to set the value of the "LowerThresholdNonCritical" property of the "NumericSensor" class. While ...
  44. The IPMI Provider attempted to set the value of the "UpperThresholdNonCritical" property of the "NumericSensor" class. While ...
  45. The IPPortSecurityEnabled property indicates whether IP port security is enabled globally across all IP-bound network adapters. ...
  46. The IPsec Policy Agent service experienced a critical failure and has shut down. The shutdown of this service can put the ...
  47. The IPsec Policy Agent service was stopped. Stopping this service can put the computer at greater risk of network attack ...
  48. The IPsec policy data could not be saved because you do not have administrative permissions (you must be a member of the ...
  49. The IPsec policy is assigned, but the IPsec service is not running. You must start the 'IPsec Services' service to activate ...
  50. The IPsec policy storage container could not be created. You might not have administrative permissions (you must be a member ...
  51. The IPsec policy storage container could not be opened. You might not have administrative permissions (you must be a member ...
  52. The IPsec protocol provides a connection with the highest level of data protection and security. If your target and initiator ...
  53. The IPSec security association timeout has been reset on this machine as part of cluster node cleanup. This restores the ...
  54. The IPsec security policies don't match The IPsec security policies of the two computers don't match. This is preventing ...
  55. The IPsec security policies don't match The IPsec security policies of the two computers don't match. This is preventing ...
  56. The IPSecPermitIPProtocols parameter specifies the list of protocols permitted to run over the IP. A numeric value of zero ...
  57. The IPSecPermitIPProtocols property lists the protocols permitted to run over the IP. The list of protocols is defined using ...
  58. The IPSecPermitTCPPorts parameter specifies the list of ports that should be granted access permission for TCP. A numeric ...
  59. The IPSecPermitTCPPorts property lists the ports that will be granted access permission for TCP. The list of protocols is ...
  60. The IPSecPermitUDPPorts parameter specifies the list of ports that should be granted access permission for UDP. A numeric ...
  61. The IPSecPermitUDPPorts property lists the ports that will be granted User Datagram Protocol (UDP) access permission. The ...
  62. The IPSubnet property contains a list of all the subnet masks associated with the current network adapter. Example: 255.255.0 ...
  63. The IPUseZeroBroadcast parameter specifies the value indicating whether IP zero broadcast is used. Setting the parameter ...
  64. The IPUseZeroBroadcast property indicates whether IP zeros-broadcasts are used. If this parameter is set TRUE, then IP uses ...
  65. The IPv4 address %1 having managed by service %2, service instance %3, virtualization type %4, address space %5 and owner ...
  66. The IPv4 address %1 of type %2 having managed by %3, service instance %4 and address space %5 has been added.%rIPv4 address: ...
  67. The IPv4 address %1 of type %2 having managed by %3, service instance %4 and address space %5 has been deleted.%rIPv4 address: ...
  68. The IPv4 address %1 of type %2 having managed by %3, service instance %4 and address space %5 has been updated with the value ...
  69. The IPv4 address block %1 has been added with the value %2 for the configuration setting %3.%rIPv4 address block: %1%rConfiguration ...
  70. The IPv4 address block %1 has been updated with the value %2 for the configuration setting %3. The previous value was %4.%rIPv4 ...
  71. The IPv4 address entered contains one or more parts that are greater than the maximum value of a BYTE (8-bit number). Should ...
  72. The IPv4 address range %1 of type %2 having start IP address %3, end IP address %4, managed by %5, service instance %6 and ...
  73. The IPV4 static settings are invalid. Valid IPV4 static settings must include all of the following: IPV4 addresses, IPV4 ...
  74. The IPv4 subnet %1 of type %2 and address space %3 has been updated with the value %4 for the configuration setting %5. The ...
  75. The IPv6 address %1 having managed by service %2, service instance %3, virtualization type %4, address space %5 and owner ...
Deutsch (Deutschland)
German (Germany) Español (España)
Spanish (Spain) Français (France)
French (France) italiano
Italian 日本語
Japanese 한국어
Korean Português
Portuguese Русский
Russian English
English (United States)