Windows Server 2003
- A zone transfer request for the secondary zone %1 was refused by the master DNS server at %2. Check the zone at the master ...
- aaaa server configuration was successfully set, but the service configuration was not refreshed. Restart the service to implement ...
- abort/restart off-line by host bit) - If this bit is set to one, then the device shall abort all off-line data collection ...
- Aborting redirection of folder %1. The expanded target path is too long. The folder is configured to be redirected to . Expanded ...
- Aborting redirection of folder %1. The new folder path cannot be a subdirectory of the current path. The folder is configured ...
- Aborting redirection of the folder. The destination folder %s already exists, but does not have the required access permissions, ...
- Aborting the password change on cluster %1!ws! after %2!d! attempts because the number of nodes in the cluster is not stable. ...
- About Compatibility Compatible Hardware and Software provides a link to resources on Microsoft's Web site to help you research ...
- About Windows Update Windows Update is the online extension of Windows that helps you to keep your computer up-to-date. Use ...
- Accept unsigned and unencrypted inbound traffic, but always respond using IPsec. (Not recommended for servers exposed to ...
- Accepts unsecured communication, but always requires clients to establish trust and security methods. Will NOT communicate ...
- Accepts unsecured communication, but always requires clients to establish trust and security methods. Will NOT communicate ...
- Accepts unsecured communication, but requests clients to establish trust and security methods. Will communicate insecurely ...
- Access denied attempting to launch a DCOM Server using DefaultLaunchPermssion. The server is: %1 The user is %2/%3, SID=%4. ...
- Access denied to Windows Management Instrumentation server on %arg1%. Have an administrator change your access permissions. ...
- Access denied to Windows Management Instrumentation server on this computer. Have an administrator change your access permissions. ...
- Access denied, you must be an administrator of the remote computer to use this command. Either have your account added to ...
- Access describes whether the media is readable (value=1), writeable (value=2), or both (value=3). \"Unknown\" (0) and \"Write ...
- Access request for user %1 was discarded. Fully-Qualified-User-Name = %2 NAS-IP-Address = %3 NAS-Identifier = %4 Called-Station-Identifier ...
- Access to a cluster file share can be granted/denied only to domain users and groups. Please remove any local users or groups ...
- Access to intranet sites, Web-based applications that run over a local intranet, and other files on network shares may be ...
- Access to the %1 namespace was denied. The namespace is marked with RequiresEncryption but the client connection was attempted ...
- Access to the cluster can be granted/denied only to domain users and groups. Please remove any local users or groups from ...
- Access to the cluster can be granted/denied only to domain users and groups. Please use the Security tab to remove the local ...
- Access to the database is denied. Unless the permissions on the database have been changed, you must have administrative ...
- According to our records, the number of times you can activate Windows with this product key has been exceeded. Please enter ...
- According to RADIUS RFC 2865, the format of this attribute is Type (1 byte), Length (1 byte), Vendor ID (4 bytes), String. ...
- Account %1 already exists on the target domain, but the user information %2 (%3) in the source domain is different from %4 ...
- Account changes will take effect the next time the 'IPSEC Services' service is started. Do you want to start the 'IPSEC Services' ...
- Account Name Changed: Old Account Name: %1 New Account Name: %2 Target Domain: %3 Target Account ID: %4 Caller User Name: ...
- Account policy in GPO %1,if any, was ignored because account policy on domain controllers can only be configured through ...
- Accounting has not been configured properly. The server where accounting information should be logged may not be present, ...
- Accounting request for user %1 was discarded. Fully-Qualified-User-Name = %2 NAS-IP-Address = %3 NAS-Identifier = %4 Called-Station-Identifier ...
- ACPI BIOS does not contain an IRQ for the device in PCI slot %3, function %4. Please contact your system vendor for technical ...
- ACPI BIOS indicates that device on slot %4, function %5 is attached to an IRQ routing device named %3. This device cannot ...
- ACPI BIOS indicates that the machine has suffered a fatal error and needs to be shutdown as quickly as possible. Please contact ...
- ACPI BIOS is attempting to create an illegal memory OpRegion, starting at address %3, with a length of %4. This region lies ...
- ACPI BIOS is attempting to read from an illegal IO port address (%3), which lies in the %4 protected address range. This ...
- ACPI BIOS is attempting to write to an illegal IO port address (%3), which lies in the %4 protected address range. This could ...
- ACPI BIOS is attempting to write to an illegal PCI Operation Region (%3), Please contact your system vendor for technical ...
- ACPI BIOS is trying to reference a GPE Index (%3) when there are no GPE blocks defined by the BIOS. Please contact your system ...
- ACPI Name Space Object %2 reports an _ADR (%3) that is already in use. Such conflicts are not legal. Please contact your ...
- ACPI Name Space Object %2 reports an _HID (%3) that is already in use. Such conflicts are not legal. Please contact your ...
- Action to take on policy removal: 1 = leave folder in new location, 2 = redirect the folder back to the user profile location ...
- ActionType = %s Description = %s ActionPath = %s. This action did not have permission to run in the WinLogon context, see ...
- ActionType = %s Description = %s ActionPath = %s. This action was skipped because this connectoid cannot currently display ...
- Activate Windows cannot run because local scripting has been disabled on this computer. Scripting may have been disabled ...
- Activation has already been reset the maximum number of times for this installation. Your activation timer will not be cleared. ...
- Activation of this client access license code via the telephone did not succeed because a Confirmation ID could not be set ...
- Activation of this client access license code via the telephone did not succeed because an Installation ID could not be generated ...
- activation works the same way, except that you can use %2 for a specified number of days before you're required to activate ...
- activation works the same way, except that you can use %2 for the specified activation period before you're required to activate ...
- Active Accessibility requires Windows NT 4.0 Service Pack 4 or newer. Please install Service Pack 4 and re-run this installation. ...
- Active Directory added a replication link for the following writable directory partition from the following domain controller. ...
- Active Directory attempted to add a crossRef object, but the directory partition name reference (nCName attribute) conflicts ...
- Active Directory attempted to add a crossRef object, but the directory partition name reference (nCName attribute) conflicts ...
- Active Directory attempted to add a crossRef object, but the directory partition name reference (nCName attribute) conflicts ...
- Active Directory attempted to communicate with the following global catalog and the attempts were unsuccessful. Global catalog: ...
- Active Directory attempted to perform a remote procedure call (RPC) to the following server. The call timed out and was cancelled. ...
- Active Directory attempted to rebuild the cache of crossRef objects but failed. Retry interval (minutes): %3 An attempt to ...
- Active Directory cannot use the user defined TCP port because of memory constraints. A dynamic RPC chosen port will be used ...
- Active Directory cannot verify the trust. If the other side of the trust relationship doesn't exist yet, you must create ...
- Active Directory configuration information is missing from the following registry location. Registry key: %1 User Action ...
- Active Directory could not allocate enough memory to remove the application partition %1. Try removing the application partition ...
- Active Directory could not allocate the following amount of memory while caching the schema. Memory (bytes): %1 User Action ...
- Active Directory could not allocate the needed amount of memory. Memory (bytes): %1 Active Directory will continue to operate, ...
- Active Directory could not be initialized because the schema could not be loaded. User Action Restart the local domain controller ...
- Active Directory could not be initialized. The operating system cannot recover from this error. User Action Restore the local ...
- Active Directory could not be installed and configured on this server. To install Active Directory, try running the Configure ...
- Active Directory could not be installed from the restored database files because the replication epochs (MsDS-ReplicationEpoch) ...
- Active Directory could not be installed from the restored files. The system startup disk may have been removed from the floppy ...
- Active Directory could not be removed on this domain controller because this is the last domain controller in the domain ...
- Active Directory could not be removed on this domain controller because this is the last domain controller in the domain, ...
- Active Directory could not be removed. To remove Active Directory, try running the Configure Your Server Wizard again, or ...
- Active Directory could not be removed. To remove Active Directory, try running the Configure Your Server Wizard again, or ...